HOME > 각종 셀렉터/분배기/변환 컨버터 > SDI / HD-SDI / DIN 케이블 / 컨버터 분배기 셀렉터 > SDI 컨버터 / 분배기 / 관련장비
확대보기

[15740]EXTRON SMX 200 with 88 HD-SDI Matrix [가격문의]
스   펙 :
제조사 : Extron [익스트론]
수   량 :
판매가 : 0 원
적립금 : 0 원
5만원이상 구매시 무료배송 납품/납기 견적요청은 전화주시기 바랍니다.
장바구니담기 바로주문하기
이전화면
Model Version Description Part #      
SMX 200 Frame   2U/4-Slot   60-1021-01  
SMX 200 Frame RPS   2U/4-Slot with Redundant Power Supply   60-1021-11  
SMX 300 Frame   3U/6-Slot   60-855-01  
SMX 300 Frame RPS   3U/6-Slot with Redundant Power Supply   60-855-11  
SMX 400 Frame   4U/8-Slot   60-856-01  
SMX 400 Frame RPS   4U/8-Slot with Redundant Power Supply   60-856-11  
SMX 500 Frame   5U/10-Slot   60-857-01  
SMX 500 Frame RPS   5U/10-Slot with Redundant Power Supply   60-857-11
Product Diagram
SMX System MultiMatrix Switchers
Video — composite video  (SMX 84/88/1616 V)
   Routing 
      SMX 84 V  8 x 4 matrix
      SMX 88 V  8 x 8 matrix
      SMX 1616 V  16 x 16 matrix
   Gain  Unity
   Bandwidth  150 MHz (-3 dB), fully loaded
   Differential phase error  1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk  -60 dB @ 5 MHz
   Switching speed  100 ms (max.)
Video input — composite video  (SMX 84/88/1616 V)
   Number/signal type  8 or 16 composite video, S/PDIF digital audio (not reclocked)
   Connectors  8 or 16 female BNC
   Nominal level  1 Vp-p for composite video
   Minimum/maximum levels  Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
Video output — composite video  (SMX 84/88/1616 V)
   Number/signal type  4, 8, or 16 composite video, S/PDIF digital audio (not reclocked)
   Connectors  4, 8, or 16 female BNC
   Nominal level  1 Vp-p for composite video
   Minimum/maximum levels  0.1 V to 2.0 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
Sync — composite video  (SMX 84/88/1616 V)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
Video — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Routing 
      SMX 84 SV/YC  8 x 4 matrix
      SMX 88 SV/YC  8 x 8 matrix
      SMX 1616 SV/YC  16 x 16 matrix
   Gain  Unity
   Bandwidth  150 MHz (-3 dB), fully loaded
   Differential phase error  1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error  1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk  -60 dB @ 5 MHz
   Switching speed  100 ms (max.)
Video input — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Number/signal type  8 or 16 S-video, composite video
   Connectors 
      SMX 84/88/1616 SV  8 or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC  8 or 16 x 2 female BNC
   Nominal level  1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
Video output — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Number/signal type  4, 8, or 16 S-video, composite video
   Connectors 
      SMX 84/88/1616 SV  4, 8, or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC  4, 8, or 16 x 2 female BNC
   Nominal level  1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  0.1 V to 2.0 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
Sync — S-video  (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
Video — wideband  (SMX 84/88/1616 WB)
   Routing 
      SMX 84 WB  8 x 4 matrix
      SMX 88 WB  8 x 8 matrix
      SMX 1616 WB  16 x 16 matrix
   Gain  Unity
   Bandwidth  400 MHz (-3 dB), fully loaded
   Crosstalk
      8x8  -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz
      16x16  -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz
   Switching speed  200 ms (max.)
Video input — wideband  (SMX 84/88/1616 WB)
   Number/signal type  8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)
   Connectors  8 or 16 female BNC
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-30 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
Video output — wideband  (SMX 84/88/1616 WB)
   Number/signal type  4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-30 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
   Switching type  Triple-Action
Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC
   Input type 
      SMX 88 SYNC, SMX 1616 SYNC  Composite sync (S)
      SMX 88 H+V  Separate H and V sync
   Output type (follows input) 
      SMX 88 SYNC, SMX 1616 SYNC  Composite sync (S)
      SMX 88 H+V  Separate H and V sync
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Max. propagation delay  35 ns
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)
Video — VGA  (SMX 84/88/1616 VGA)
   Routing 
      SMX 84 VGA  8 x 4 matrix
      SMX 88 VGA  8 x 8 matrix
      SMX 1616 VGA  16 x 16 matrix
   Gain  Unity
   Bandwidth  350 MHz (-3 dB), fully loaded
   Crosstalk 
      8x8  -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz
      16x16  -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz
   Switching speed  200 ms (max.)
Video input — VGA  (SMX 84/88/1616 VGA)
   Number/signal type  8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors  8 or 16 female 15-pin HD
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Return loss  <-36 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
Video output — VGA  (SMX 84/88/1616 VGA)
   Number/signal type  4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors  4, 8, or 16 female 15-pin HD
   Nominal level  0.7 Vp-p for RGB
   Minimum/maximum levels  0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-36 dB @ 5 MHz
   DC offset  ±6 mV with input at 0 offset
   Switching type  Triple-Action
Sync — VGA  (SMX 84/88/1616 VGA)
   Input type  RGBHV, RGBS, RGsB, RsGsBs
   Output type  RGBHV, RGBS, RGsB, RsGsBs (follows input)
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Horizontal frequency  15 kHz to 150 kHz
   Vertical frequency  30 Hz to 150 Hz
   Max. propagation delay  40 ns
   Max. rise/fall time  18 ns
   Polarity  Positive or negative (follows input)
Digital video  — SMX 44/84/88/1616 SDI
   Routing 
      SMX 44 HD SDI  4 x 4 matrix
      SMX 84 HD SDI  8 x 4 matrix
      SMX 88 HD SDI  8 x 8 matrix
      SMX 1616 HD SDI  16 x 16 matrix
   Gain  Unity
   Maximum data rate  2.97 Gbps
   Data types  8 or 10 bit
   Operation standards  SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120
Digital video input  — SMX 44/84/88/1616 SDI
   Number/signal type  4, 8, or 16 single-link SDI, HD-SDI; or dual-link HD-SDI
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.80 Vp-p ± 10%
   Impedance  75 ohms
   Return loss  <-15 dB @ 1 MHz to 1.5 GHz
   Equalization  Automatic
   Input cable equalization distance
      HD-SDI 
         Extron SHR, Belden 1694A cable  500' (152 m)
         Extron HR, Belden 1505A cable  400' (122 m)
      SDI 
         Extron SHR, Belden 1694A cable  750' (229 m)
         Extron HR, Belden 1505A cable  550' (168 m)
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Digital video output  — SMX 44/84/88/1616 SDI
   Number/signal type  4, 8, or 16 single-link SDI, HD-SDI; or dual-link HD-SDI
   Connectors  4, 8, or 16 female BNC
   Nominal level  0.80 Vp-p ± 10%
   Impedance  75 ohms
   Return loss  <-15 dB @ 1 MHz to 1.5 GHz
   DC offset  ±0.5 V with input at 0 offset
   Re-clocking  Automatic, or use available bypass mode for nonstandard rates
   Jitter  <0.2 VI
   Rise/fall time (20-80%) 
      SDI  700 ps ±100 ps
      HD-SDI  250 ps ±100 ps
Video  — SMX 44/48/84/88 DVI
    NOTE     *Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output.
   Routing
      SMX 44 DVI  4 x 4 matrix
      SMX 48 DVI  4 x 8 matrix
      SMX 84 DVI  8 x 4 matrix
      SMX 88 DVI  8 x 8 matrix
   Gain  Unity
   Maximum data rate  4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock  165 MHz
   Resolution range  Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz
   Signal type  Single-link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX DVI Series boards are not compatible with HDMI 1.3.
      Digital audio  Not supported
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP  Not supported
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Standards  DVI 1.0, HDMI 1.2
   Switching speed  200 ns, max.
Video input  — SMX 44/48/84/88 DVI
   Number/signal type  4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I
   Equalization  Automatic
   Input cable length  >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output  — SMX 44/48/84/88 DVI
   Number/signal type  4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I
   Re-clocking  Automatic
   Peripheral device power  250 mA per output
Video  — SMX 44/48/84/88 DVI PRO
    NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
   Routing 
      SMX 44 DVI PRO  4 x 4 matrix
      SMX 48 DVI PRO  4 x 8 matrix
      SMX 84 DVI PRO  8 x 4 matrix
      SMX 88 DVI PRO  8 x 8 matrix
   Gain  Unity
   Resolution range  Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
   Signal type  Single-link DVI digital video signals are supported.
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX DVI PRO Series boards are compatible with HDMI 1.3.
      Digital audio  Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  225 MHz
   Standards  DVI 1.0, HDMI 1.3
   Switching speed  200 ns, max.
Video input  — SMX 44/48/84/88 DVI PRO
   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I (digital only)
   Equalization  Automatic
   Input cable length  >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output  — SMX 44/48/84/88 DVI PRO
   Number/signal type  4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors  4 or 8 female DVI-I (digital only)
   Re-clocking  Automatic
   Peripheral device power  250 mA per output
Video  — SMX 44/48/84/88 HDMI
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
   Routing 
      SMX 44 HDMI  4 x 4 matrix
      SMX 48 HDMI  4 x 8 matrix
      SMX 84 HDMI  8 x 4 matrix
      SMX 88 HDMI  8 x 8 matrix
   Gain  Unity
   Resolution range  Up to 1920x1200 or 1080p @ 60 Hz
   Signal type  Single-link HDMI (or DVI-D*)
      Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX HDMI Series boards are compatible with HDMI 1.3.
      Digital audio  Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC)  Not supported
      EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
      HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate  6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock  225 MHz
   Standards  DVI 1.0, HDMI 1.3
   Switching speed  200 ns, max.
Video input  — SMX 44/48/84/88 HDMI
   Number/signal type  4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
   Connectors  4 or 8 female HDMI type A
   Equalization  Automatic
   Input cable length  >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output  — SMX 44/48/84/88 HDMI
   Number/signal type  4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
   Connectors  4 or 8 female HDMI type A
   Re-clocking  Automatic
   Peripheral device power  250 mA per output
Optical specifications — SMX 88/1616 FOX 4G Fiber Optic I/O board
    NOTE     The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
   Number/type  8 or 16 singlemode, or 8 or 16 multimode fiber optic inputs and outputs per I/O board
    NOTE     Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
   Connectors  16 or 32 LC connectors per I/O board
   Operating distance 
      Singlemode  30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit
      Multimode  300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit
    NOTE     Operating distance is approximate.  These are typical distances.  The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength  850 nm for multimode (MM), 1310 nm for singlemode (SM)
   Transmission power 
      Singlemode  -5 dBm, typical
      Multimode  -5 dBm, typical
   Optical loss budget 
      Singlemode  12 dB, maximum
      Multimode  7 dB, maximum
   Maximum channel data rate  4.25 Gbps
Video  — SMX 88/1616 FOX 4G
   Routing  8 x 8 or 16 x 16 unidirectional (Tx) matrix or
4 x 4 or 8 x 8 bidirectional (Tx/Rx) matrix
   Gain  Unity
   Pixel data bit depth  8 bits per channel, 3 channels (R, G, B)
Video/audio input  — SMX 88/1616 FOX 4G
   Number/signal type  8 or 16 fiber optic signals
   Connectors  8 or 16 LC connectors per I/O board
    NOTE     Input comes from an Extron fiber optic transmitter or fiber optic distribution amplifier.
Video/audio output  — SMX 88/1616 FOX 4G
   Number/signal type  8 or 16 fiber optic signals
   Connectors  8 or 16 LC connectors per I/O board
    NOTE     Output connects to an Extron fiber optic receiver.
Audio  — SMX 84/88/1616A (analog)
   Routing 
      SMX 84 A  8 x 4 stereo matrix
      SMX 88 A  8 x 8 stereo matrix
      SMX 1616 A  16 x 16 stereo matrix
   Gain  Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response  20 Hz to 20 kHz, ±0.05 dB
   THD + Noise  0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >102 dB at maximum output (21 dBu, unweighted) (balanced)
   Crosstalk  <-95 dB @ 1 kHz, fully loaded
   Stereo channel separation  >98 dB @ 1 kHz
   CMRR  >70 dB @ 20 Hz to 20 kHz
Audio input  — SMX 84/88/1616 A (analog)
   Number/signal type  8 or 16 stereo, balanced/unbalanced
   Connectors  (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance  >10k ohms unbalanced/balanced, DC coupled
   Nominal level  0 dBu (0.775 Vrms)
   Maximum level  +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment  –18 dB to +24 dB, adjustable per input; default = 0 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — SMX 84/88/1616 A (analog)
   Number/signal type  4, 8, or 16 stereo, balanced/unbalanced
   Connectors  (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Maximum level (Hi-Z)  >+21 dBu, balanced or unbalanced at 0.1% THD+N
   Maximum level (600 ohm)  >+15 dBm, balanced or unbalanced at 0.1% THD+N
   Volume control range  -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
Control/remote — switcher host ports
   Serial host control port  1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
   Baud rate and protocol  9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin female D connector 
         RS-232  2 = Tx, 3 = Rx, 5 = GND
         RS-422  2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
      Mini stereo jack 
         RS-232