TP Series Receivers |
|
Video |
Number/signal type |
1 or 2 sets of proprietary analog signals |
Connectors |
1 or 2 shielded RJ-45 female |
|
Video input — refer to the TP Transmitters Family User's Manual, part #68-546-02 |
|
Video output |
Number/signal type |
|
TP R BNC A |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source |
TP R BNC AV |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL/SECAM composite video from a single source and 1 NTSC/PAL/SECAM composite video |
TP R 15HD A |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or 1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or 3 NTSC/PAL composite video from a single source |
NOTE |
These products output component video with bi-level sync only. | |
Connectors |
|
TP R BNC A |
5 BNC female |
TP R BNC AV |
6 BNC female |
TP R 15HD A |
(1) 15-pin HD female |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels |
0.3 V to 1.45 Vp-p |
Impedance |
75 ohms |
Maximum resolution |
1600x1200 |
NOTE |
Refer to the user's manual for the maximum distances recommended for specific resolutions. | |
|
Audio |
Number/signal type |
1 or 2 sets of analog proprietary signals |
Connectors |
1 or 2 shielded RJ-45 female |
Frequency response |
20 Hz to 20 kHz, >¡¾0.05 dB |
THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted) |
S/N |
>63 dB at nominal level |
Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
Stereo channel separation |
>80 dB @ 1 kHz |
CMRR |
>33 dB @ 20 Hz to 20 kHz |
|
Audio input — refer to the TP Transmitters Family User's Manual, part #68-546-02 |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
Audio output |
Number/signal type |
|
TP R BNC A |
1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced |
TP R 15HD A |
1 stereo audio balanced/unbalanced |
TP R BNC AV |
2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced |
Connectors |
|
TP R 15HD A |
(1) 3.5 mm, 5-pole captive screw connector per input |
All other models |
2 female RCA (left/right) per input |
|
(1) 3.5 mm, 5-pole captive screw connector per input |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
¡¾0.1 dB channel to channel |
Maximum level (600 ohm) |
>+11.5 dBm, balanced at 1%THD+N |
|
General |
Recommended cable type |
Enhanced Skew-Free¢â A/V UTP Cable or CAT 5/5e/6 (shielded or unshielded) |
Power |
|
TP R BNC AV |
100 VAC to 240 VAC, 50-60 Hz, 40 watts, internal |
External power supply |
|
All models except TP R BNC AV |
100 VAC to 240 VAC, 50-60 Hz, external; to 15 VDC, 0.8 A, regulated |
Power input requirements |
|
TP R BNC A |
15 VDC, 0.3 A (minimum) |
TP R 15HD A |
15 VDC, 0.34 A (maximum) |
Temperature/humidity |
Storage -40¡Æ to +158¡ÆF (-40¡Æ to +70¡ÆC) / 10% to 90%, noncondensing Operating +32¡Æ to +122¡ÆF (0¡Æ to +50¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Convection, no vents |
Mounting |
Rack mount |
|
TP R 15HD A |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10; RSB 126, 60-604-10); or 1U, 3.5" deep rack shelf (RSF 123, #60-190-20 or RSB 123, #60-604-20; RSB 123, 60-604-20) |
TP R BNC A, TP R BNC AV |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01) |
Pole mount |
|
TP R BNC A, TP R BNC AV |
Yes, with optional pole mounting kit PMK 100 (part #70-217-01) or PMK 200 (#70-077-04) |
Enclosure type |
Metal |
Enclosure dimensions |
|
TP R BNC A |
1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide) (3.3 cm H x 22.2 cm W x 17.8 cm D) (Depth excludes connectors.) |
TP R BNC AV |
1.7" H x 8.75" W x 7.0" D (1U high, half rack wide) 4.3 cm H x 22.2 cm W x 17.8 cm D (Depth excludes connectors.) |
TP R 15HD A |
1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide) (4.1 cm H x 10.8 cm W x 7.6 cm D) (Depth excludes connectors.) |
Product weight |
|
TP R BNC A |
1.6 lbs (0.7 kg) |
TP R BNC AV |
2.6 lbs (1.2 kg) |
TP R 15HD A |
0.4 lbs (0.2 kg) |
Shipping weight |
|
TP R BNC A |
4 lbs (2 kg) |
TP R BNC AV |
5 lbs (3 kg) |
TP R 15HD A |
2 lbs (1 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
Safety |
CE, CUL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
MTBF |
30,000 hours |
Warranty |
3 years parts and labor |