MLS 608 D Series with SYS/MLS D R |
|
Video — MLS analog inputs |
Gain |
Unity |
Bandwidth |
350 MHz (-3 dB), fully loaded |
Skew compensation |
Up to 62 ns (adjustable) |
|
Video — MLS digital inputs |
Maximum data rate |
6.75 Gbps (2.25 Gbps per color) |
Maximum pixel clock |
225 MHz |
Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
Formats |
RGB and YCbCr digital video |
Standards |
DVI 1.0, HDMI 1.3 |
|
Video input and loop-through MLS |
Number/signal type |
|
Analog |
3 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video input 1 RGBHV, RGBS, RGsB, RsGsBs loop-through 1 analog proprietary signal from an Extron MTP transmitter |
NOTE |
The switcher does not accept or pass RS-232 serial signals from an MTP transmitter on the MTP inputs. | |
Digital video |
4 HDMI (or DVI*) digital video |
Impedance |
|
Analog inputs |
75 ohms |
Horizontal frequency |
15 kHz to 145 kHz |
Vertical frequency |
30 Hz to 170 Hz |
Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
|
Video output — MLS |
Number/signal type |
3 proprietary signals for an Extron MTP receiver: 1 analog, 2 digital |
Maximum resolution |
1920x1200 or 1080p @ 60 Hz (for digital output) |
|
Audio — MLS |
Gain |
Unbalanced output: -6 dB; balanced output: 0 dB |
Frequency response, nonamplifier models |
Lineout |
20 Hz to 20 kHz, ¡¾0.15 dB |
Frequency response, amplifier models |
Power amp (4 or 8 ohm) |
20 Hz to 20 kHz, -1.0 dB to +3.5 dB @ 1 watt output, 8 ohm load |
Lineout |
20 Hz to 20 kHz, ¡¾0.15 dB |
THD + Noise |
|
Power amp (amplifier models only) |
0.2% @ 1 kHz at nominal level (1 watt, 8 ohm load), mono or stereo |
Lineout |
0.01% @ 1 kHz at nominal level |
S/N at max. power output or line level output (unweighted) |
Power amp (amplifier models only) |
>67 dB at 20 Hz to 20 kHz, 8 ohm load |
Lineout |
>105 dB, balanced |
Crosstalk |
|
Power amp (amplifier models only) |
<-70 dB @ 1 kHz |
Lineout |
<-90 dB @ 1 kHz, fully loaded |
Stereo channel separation |
>96 dB @ 1 kHz |
CMRR |
>70 dB @ 1 Hz |
Volume range |
-100 dB to 0 dB (volume numbers 0 to 64 in 1.0 dB steps, except from step 0 to 1, which is a 37 dB step) |
|
Audio input — MLS |
Number/signal type |
7 stereo, balanced/unbalanced (inputs 1-3, 5-8) 2 mono, balanced/unbalanced (mic/line level inputs) 1 proprietary analog signal (mono, balanced/unbalanced, from MTP input 4) |
Impedance |
|
Mic/line input |
>2.5k ohms unbalanced, >5.0k ohms balanced |
All other inputs |
>11.5k ohms unbalanced, 22k ohms balanced, DC coupled |
Nominal level |
|
Mic/line input |
Mic level, -60 dBV (1 mVrms) when mic gain is set to +40 dB |
All other inputs |
+4 dBu (1.23 Vrms) |
Input gain adjustment |
|
Mic/line input |
0 dB to +80 dB, adjustable per input |
All other inputs |
-18 dB to +24 dB, adjustable per input by RS-232, Ethernet, or front panel |
Mic phantom power |
+48 VDC (can be switched on or off) |
|
Audio output — line level (all models) — MLS |
Number/signal type |
2 stereo or dual mono, balanced/unbalanced (fixed or variable, selectable) 1 dual mono, balanced/unbalanced (fixed or variable, selectable), via MTP |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Nominal level |
-10 dBV (316 mV) |
|
Audio output — power amplifier (amplifier models only) — MLS |
Number/signal type |
|
MA model |
1 mono, 70 V line |
SA model |
1 stereo (default) or dual mono, 2 channels total |
Connector |
(1) 5 mm screw lock captive screw connector, 4 pole |
NOTE |
These connectors accept wires of 22 AWG to 12 AWG. | |
Load impedance |
4 or 8 ohms |
Amplifier type |
Class D |
Output power |
|
MA model |
50 watts (rms), 70 V, 1 watt tolerance, 1 kHz, 1% THD |
SA model |
25 watts (rms) per channel, 1 watt tolerance; 4 or 8 ohms; 1 kHz; 1% THD |
Frequency response |
20 Hz to 20 kHz, 0-1 dB to +3.5 dB @ 1 watt output, 8 ohm load |
Damping factor |
>75 (8 ohm load) |
|
Control/remote — switcher — MLS |
Serial control port |
1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 5 pole (only 3 poles are used) |
USB control ports |
1 front panel female mini USB B |
USB standards |
USB 2.0, low speed |
|
General — MLS |
Power |
100 VAC to 240 VAC, 50-60 Hz, 50 watts, 5 A, internal |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +32 to +111 ¡ÆF (0 to +43.9 ¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Convection, vents on sides and top |
Rack mount |
Yes, with included brackets |
Enclosure type |
Metal |
Enclosure dimensions |
1.75" H x 17.5" W x 12.0" D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 30.5 cm D) (Depth excludes connectors, knob, and buttons. Width excludes rack ears.) |
Product weight |
7 lbs (3.2 kg) |
Shipping weight |
11 lbs (5 kg) |
DIM weight |
|
USA/Canada |
12 lbs (6 kg) |
International |
12 lbs (6 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
Compliances |
CE, C-tick, FCC Class A, ICES, VCCI |
Environmental |
Complies with the appropriate requirements of RoHS, WEEE |
Accessibility |
Section 508 of the Rehabilitation Act (29 U.S.C. 794d) |
MTBF |
30,000 hours |
Warranty |
3 years parts and labor |
|
Video — SYS/MLS D R |
MTP input |
|
Gain |
Unity |
Signal transmission distance, analog |
|
HDMI digital input |
|
Maximum data rate |
6.75 Gbps (2.25 Gbps per color) |
Maximum pixel clock |
225 MHz |
Maximum resolution |
|
Analog output |
Up to 2048x1080 or 1080p at 60 Hz |
HDMI digital output |
Up to 1920x1200 or 1080p at 60 Hz |
Signal transmission distance, digital |
|
Formats |
RGB and YCbCr digital video |
Standards |
DVI 1.0, HDMI 1.3 |
|
Video output — SYS/MLS D R |
Number/signal type |
|
Analog output |
1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) |
HDMI digital output |
1 single link HDMI (or DVI-D*) |
Nominal levels |
Analog outputs: 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum level |
Analog outputs: 0.8 V to 1.2 Vp-p |
Impedance |
Analog outputs: 75 ohms (during video output only) |
Return loss |
Analog outputs: <-30 dB @ 5 MHz (during video output only) |
DC offset |
Analog outputs: <¡¾20 mV with input at 0 offset |
|
Sync — analog outputs — SYS/MLS D R |
Output type |
RGBHV, RGBS, Component video (bi- or tri-level) |
Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
Audio output — from MTP input — SYS/MLS D R |
Number/signal type |
2 mono, balanced/unbalanced |
Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
¡¾1 dB channel to channel |
|
General — SYS/MLS D R |
Recommended cable type |
Shielded or unshielded |
MTP input |
CAT 5/5e/6 |
HDMI digital input |
CAT 5/5e/6, Extron DTP26 |
Power |
Remotely powered: supplied only by a System 208 D or MLS 608 D switcher |
Power input requirements |
12 VDC, 0.8 A |
Temperature/humidity |
Storage: -40 to +158¡ÆF (-40 to 70¡ÆC)/10% to 90%, noncondensing Operating: +32 to +122¡ÆF (0 to +50¡ÆC)/10% to 90%, noncondensing |
Cooling |
Convention, vents on sides |
Thermal dissipation |
|
115 VAC, 60 Hz |
16.7 BTU/hr |
240 VAC, 50 Hz |
18.1 BTU/hr |
Mounting |
|
Rack mount |
Yes, with optional 1U rack shelf |
Furniture mount |
Yes, with optional under-desk mounting kit |
Pole mount |
Yes, with optional projector mounting kit |
Enclosure type |
Metal |
Enclosure dimensions |
1.7" H x 8.75" W x 3.0" D (half rack wide) (4.3 cm H x 22.2 cm W x 7.6 cm D) (Depth excludes connectors.) |
Product weight |
0.8 lbs (0.4 kg) |
Shipping weight |
2 lbs (1 kg) |
Vibration |
ISTA 1 A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply. |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
MTBF |
30,000 hours |
Warranty |
3 years parts and labor |