| SMX System MultiMatrix Switchers |
|
| Video — composite video (SMX 84/88/1616 V) |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-60 dB @ 5 MHz |
| Switching speed |
100 ms (max.) |
|
| Video input — composite video (SMX 84/88/1616 V) |
| Nominal level |
1 Vp-p for composite video |
| Minimum/maximum levels |
Analog: 0.1 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
|
| Video output — composite video (SMX 84/88/1616 V) |
| Nominal level |
1 Vp-p for composite video |
| Minimum/maximum levels |
0.1 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
|
| Sync — composite video (SMX 84/88/1616 V) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-60 dB @ 5 MHz |
| Switching speed |
100 ms (max.) |
|
| Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Nominal level |
1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.1 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
|
| Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Nominal level |
1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.1 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
|
| Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Video — wideband (SMX 84/88/1616 WB) |
| Gain |
Unity |
| Bandwidth |
400 MHz (-3 dB), fully loaded |
| Crosstalk |
| 8x8 |
-82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz |
| 16x16 |
-74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz |
| Switching speed |
200 ms (max.) |
|
| Video input — wideband (SMX 84/88/1616 WB) |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
|
| Video output — wideband (SMX 84/88/1616 WB) |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Switching type |
Triple-Action |
|
| Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Max. propagation delay |
35 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| Video — VGA (SMX 84/88/1616 VGA) |
| Gain |
Unity |
| Bandwidth |
350 MHz (-3 dB), fully loaded |
| Crosstalk |
|
| 8x8 |
-82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz |
| 16x16 |
-74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz |
| Switching speed |
200 ms (max.) |
|
| Video input — VGA (SMX 84/88/1616 VGA) |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-36 dB @ 5 MHz |
| DC offset (max. allowable) |
1.0 V |
|
| Video output — VGA (SMX 84/88/1616 VGA) |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-36 dB @ 5 MHz |
| DC offset |
±6 mV with input at 0 offset |
| Switching type |
Triple-Action |
|
| Sync — VGA (SMX 84/88/1616 VGA) |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Max. propagation delay |
40 ns |
| Max. rise/fall time |
18 ns |
| Polarity |
Positive or negative (follows input) |
|
| Digital video — SMX 44/84/88/1616 SDI |
| Gain |
Unity |
| Maximum data rate |
2.97 Gbps |
| Data types |
8 or 10 bit |
| Operation standards |
SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120 |
|
| Digital video input — SMX 44/84/88/1616 SDI |
| Nominal level |
0.80 Vp-p ± 10% |
| Impedance |
75 ohms |
| Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
| Equalization |
Automatic |
| Input cable equalization distance |
| HD-SDI |
|
| Extron SHR, Belden 1694A cable |
500' (152 m) |
| Extron HR, Belden 1505A cable |
400' (122 m) |
| SDI |
|
| Extron SHR, Belden 1694A cable |
750' (229 m) |
| Extron HR, Belden 1505A cable |
550' (168 m) |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. | |
|
| Digital video output — SMX 44/84/88/1616 SDI |
| Nominal level |
0.80 Vp-p ± 10% |
| Impedance |
75 ohms |
| Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
| DC offset |
±0.5 V with input at 0 offset |
| Re-clocking |
Automatic, or use available bypass mode for nonstandard rates |
| Jitter |
<0.2 VI |
| Rise/fall time (20-80%) |
|
| SDI |
700 ps ±100 ps |
| HD-SDI |
250 ps ±100 ps |
|
| Video — SMX 44/48/84/88 DVI |
| NOTE |
*Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output. | |
| Gain |
Unity |
| Maximum data rate |
4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Resolution range |
Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz |
| Signal type |
Single-link DVI digital video signals are supported. |
| Digital video |
RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE |
These SMX DVI Series boards are not compatible with HDMI 1.3. | |
| Digital audio |
Not supported |
| Consumer Electronics Control (CEC) |
Not supported |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Not supported |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Standards |
DVI 1.0, HDMI 1.2 |
| Switching speed |
200 ns, max. |
|
| Video input — SMX 44/48/84/88 DVI |
| Equalization |
Automatic |
| Input cable length |
>50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. | |
|
| Video output — SMX 44/48/84/88 DVI |
| Re-clocking |
Automatic |
| Peripheral device power |
250 mA per output |
|
| Video — SMX 44/48/84/88 DVI PRO |
| NOTE |
*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. | |
| Gain |
Unity |
| Resolution range |
Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz |
| Signal type |
Single-link DVI digital video signals are supported. |
| Digital video |
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE |
These SMX DVI PRO Series boards are compatible with HDMI 1.3. | |
| Digital audio |
Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| Consumer Electronics Control (CEC) |
Supports CEC wired infrared data pass-through using the HDMI 1.3 standard. |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate |
6.75 Gbps (2.25 Gbps per color) |
| Maximum pixel clock |
225 MHz |
| Standards |
DVI 1.0, HDMI 1.3 |
| Switching speed |
200 ns, max. |
|
| Video input — SMX 44/48/84/88 DVI PRO |
| Equalization |
Automatic |
| Input cable length |
>50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. | |
|
| Video output — SMX 44/48/84/88 DVI PRO |
| Re-clocking |
Automatic |
| Peripheral device power |
250 mA per output |
|
| Video — SMX 44/48/84/88 HDMI |
| NOTE |
*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. | |
| Gain |
Unity |
| Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
| Signal type |
Single-link HDMI (or DVI-D*) |
| Digital video |
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE |
These SMX HDMI Series boards are compatible with HDMI 1.3. | |
| Digital audio |
Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| Consumer Electronics Control (CEC) |
Supports CEC wired infrared data pass-through using the HDMI 1.3 standard. |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate |
6.75 Gbps (2.25 Gbps per color) |
| Maximum pixel clock |
225 MHz |
| Standards |
DVI 1.0, HDMI 1.3 |
| Switching speed |
200 ns, max. |
|
| Video input — SMX 44/48/84/88 HDMI |
| Equalization |
Automatic |
| Input cable length |
>50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. | |
|
| Video output — SMX 44/48/84/88 HDMI |
| Re-clocking |
Automatic |
| Peripheral device power |
250 mA per output |
|
| Optical specifications — SMX 88/1616 FOX 4G Fiber Optic I/O board |
| NOTE |
The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11. | |
| NOTE |
Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication. | |
| Operating distance |
|
| Singlemode |
30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit |
| Multimode |
300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit |
| NOTE |
Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. | |
| Nominal peak wavelength |
850 nm for multimode (MM), 1310 nm for singlemode (SM) |
| Transmission power |
|
| Singlemode |
-5 dBm, typical |
| Multimode |
-5 dBm, typical |
| Optical loss budget |
|
| Singlemode |
12 dB, maximum |
| Multimode |
7 dB, maximum |
| Maximum channel data rate |
4.25 Gbps |
|
| Video — SMX 88/1616 FOX 4G |
| Gain |
Unity |
| Pixel data bit depth |
8 bits per channel, 3 channels (R, G, B) |
|
| Audio — SMX 84/88/1616A (analog) |
| Gain |
Unbalanced output: -6 dB; balanced output 0 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
>102 dB at maximum output (21 dBu, unweighted) (balanced) |
| Crosstalk |
<-95 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>98 dB @ 1 kHz |
| CMRR |
>70 dB @ 20 Hz to 20 kHz |
|
| Audio input — SMX 84/88/1616 A (analog) |
| Impedance |
>10k ohms unbalanced/balanced, DC coupled |
| Nominal level |
0 dBu (0.775 Vrms) |
| Maximum level |
+19.5 dBu, (balanced or unbalanced) at 1% THD+N |
| Input gain adjustment |
–18 dB to +24 dB, adjustable per input; default = 0 dB |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — SMX 84/88/1616 A (analog) |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+21 dBu, balanced or unbalanced at 0.1% THD+N |
| Maximum level (600 ohm) |
>+15 dBm, balanced or unbalanced at 0.1% THD+N |
| Volume control range |
-76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB) |
| NOTE |
Attenuation = volume number minus 64. The default is 0 dB = volume number 64. | |
|
| Control/remote — switcher host ports |
| Serial host control port |
1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack |
| Baud rate and protocol |
9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| 9-pin female D connector |
|
| RS-232 |
2 = Tx, 3 = Rx, 5 = GND |
| RS-422 |
2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ |
| Mini stereo jack |
|
| RS-232 |
Tip = Tx, ring = Rx, sleeve = GND |
| Ethernet control port |
1 female RJ-45 |
| Ethernet data rate (for network communication) |
10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol |
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet |
| Ethernet default settings |
Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off |
| Web server |
Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory |
| Program control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set™ (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet |
|
| General |
| Power |
100 VAC to 240 VAC, 50-60 Hz, 180 watts (max.) with or without redundant power supply, internal |
| Power consumption |
15.0 to 180 watts, depending on configuration |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Fan, left to right (as viewed from front panel) |
| Thermal dissipation, full load |
|
| 115 VAC, 60 Hz |
50 to 620 BTU/hr, depending on configuration |
| 240 VAC, 50 Hz |
50 to 620 BTU/hr, depending on configuration |
| Mounting |
|
| Rack mount |
Yes |
| Enclosure type |
Metal |
| Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.) |
| SMX 200 Frame |
3.5" H x 17.0" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 30.5 cm D) |
| SMX 300 Frame |
5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D) |
| SMX 400 Frame |
7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D) |
| SMX 500 Frame |
8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D) |
| Product weight with boards installed |
| SMX 200 Frame |
16.2 lbs (7.3 kg) |
| SMX 300 Frame |
18.1 lbs (8.2 kg) |
| SMX 400 Frame |
20.3 lbs (9.2 kg) |
| SMX 500 Frame |
23.9 lbs (10.8 kg) |
| Shipping weight with boards installed |
| SMX 200 Frame |
20 lbs (10 kg) |
| SMX 300 Frame |
22 lbs (10 kg) |
| SMX 400 Frame |
26 lbs (12 kg) |
| SMX 500 Frame |
30 lbs (14 kg) |
| Shipping weight of individual boards, if purchased separately |
|
| SMX 88 FOX 4G |
2 lbs (1 kg) |
| SMX 1616 FOX 4G |
3 lbs (2 kg) |
| DIM weight |
|
| SMX 400 Frame |
30 lbs (14 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
