]Model Name	Description
SFC-CENTER/16M	SFC-CENTER/16M 16slots managed chassis W/AC Power
SFC200M-SCM	10 / 100 TX-FX(SC) Multi-Mode for SFC-CENTER/16M
SFC200M-STM	10 / 100 TX-FX(ST) Multi-Mode for SFC-CENTER/16M
SFC200M-SCS(30Km)	10 / 100 TX-FX(SC 30km) Single-Mode 30km
SFC200M-SCS(60Km)	10 / 100 TX-FX(SC 60km) Single-Mode 60km
SFC2000M-TS	100/1000 TX-SX multi-mode for SFC-CENTER/16M
SFC2000M-TL	100/1000 TX-LX single-mode for SFC-CENTER/16M

<16 Slot Management Converter Chassis>

	MC-16i is designed to accommodate 16 slide-in modules of various type of media converter modular, it can be install to any cabinet that compatible EIA RS310C Standard.The 16 slots Modular chassis can to accommodate many type of 100Mbps Fiber media converter , such single-mode fiber or multi-mode fiber to twisted pair cable .Each media converter module can transparently link any backbone device , such as Switch, Router, NIC and operate on independently segment.. For the management function, users can management the chassis and get each media converter module s operate information and remote side converter information, such as Link lose forwarding (LLF), management module will send Traps to NNMs and record a Log file when the event happened.

	Feature
	16 slots converter chassis with 2 power slots AC or DC power with redundant function SNMP MIB II and private MIB supports Max. 16 slots for media converter HTTP, Telnet security 10/100TX to 100FX module IP address security for management station 10/100/1000TX to Gigabit fiber module Web firmware upgrade 10/100/1000TX to GBIC or Mini GBIC module Link Loose Forwarding (LLF) 100FX WDM module support Fiber Module hot-swappable Module identification CPU module hot-swappable 100FX and Gigabit module support single mode or multi mode fiber SNMP, Web, Telnet, console management EIA RS-310C 19 " standard

	Hardware Specification
		Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX and 100BASE-FX with N-way auto negotiation IEEE802.3ab Gigabit copper with N-way auto-negotiation IEEE802.3z for Gigabit fiber Switch architecture Store and Forward, Internal Packet Gap 960ns, Filter illegal and error packet. Fiber parameters Fiber Core: Multi-Mode (62.5/125um, 50/125um) Single-Mode (8/125um, 10/125um) Wavelength: 100Mbps multi-mode : 1310nm / 100Mbps single-mode: 1310nm 100Mbps WDM 1330 : TX 1310nm , RX 1550 nm 100Mbps WDM 1550 : TX 1550nm , RX 1310 Transparent packet 64 to 1518 Bytes for Non-VLAN Ethernet packet 68 to 1522 Bytes for VLAN-Tag type Ethernet packet LED CPU Module: CPU Ready, Power Good(A, B) Power Fail(A,B),TX (link/Act, FDX) 100FX Module: Power, TX (Link /Act, speed, FDX), FX(Link /Act, FDX) Gigabit Module: Power, Gigabit Copper (Speed, 1000Mbps, LK/ACT, FDX/COL), Fiber (Link/Act, FDX/COL) Power Redundant and Load Sharing function support (AC or DC) AC 90~240 VAC, 50/60 HZ @ 20A (max) DC - 40.5 ~ - 57.0VDC @ 20A (max) Dimension 448mm(w) * 89mm(H) * 279mm(D) EMI & safety FCC Class A, CE, UL

	Software Specification
		Management Telnet, Web, console Web/Telnet Web and Telnet function can be enabled or disabled. MIBS RFC 1213 MIB II, Private MIB SNMP Trap Link down, Link up, Power module status change, authorization Fail, Module plug in and plug out, chassis configuration change, module configuration change. Software Upgrade firmware upgrade by Web interface. Link Loose Forward Each module support LLF feature. It can be set by Web or CLI menu. LLF Mode TX => Fiber :TX port link down , the fiber port will be forced down LLF Mode Fiber => TX :Fiber port link down , the TX port will be forced down Packet counter TX port: IN-good / In-bad packet counter, out-good /out-bad packet counter, collision counter Fiber port: IN-good / In-bad packet counter, out-good /out-bad packet counter SNMP Trap Node Up to 4 Trap node. IP security It supports IP security for telnet, HTTP and SNMP access. Up to 4 IP nodes when security is enabled. Events log Up to 4095 event records. It can be re-view by CLI and Web browser mode. Module notice Per module can add notice for allocate information and characters up to 32.