16*8 ~ 64*64 입출력 단자 포트에 따라서 가격 변동이 있습니다.
선 재고 여부와 가격 상담해 주시기 바랍니다.
Matrix 3200/6400 Series |
|
| Video — wideband video BME |
| Routing |
16 x 8 or larger matrix up to 32 x 32 or 64 x 64, depending on model and configuration |
| Gain |
Unity |
| Bandwidth |
|
| Matrix Wideband |
430 MHz (-3 dB), fully loaded |
| 0 - 10 MHz |
No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz |
No more than +4 dB to -0.25 dB |
| Phase between I/Os |
<1.28° at 3.58 MHz |
| Differential phase error |
0.1%, 3.58 MHz and 4.43 MHz |
| Differential gain error |
0.1°, 3.58 MHz and 4.43 MHz |
| Max. propagation of delay |
5 ns typical (±1 ns) |
| Crosstalk |
-80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz |
| Switching speed |
200 ns (max.) |
|
| Video — low resolution video BME |
| Routing |
16 x 8 or larger matrix up to 32 x 32 or 64 x 64, depending on model and configuration |
| Gain |
Unity |
| Bandwidth |
|
| Matrix Low Res |
| 150 MHz (-3 dB), fully loaded |
| 0 MHz to 10 MHz: |
no more than +0.1 dB to -0.1 dB |
| 0 MHz to 30 MHz: |
no more than +0.5 dB to -0.5 dB | |
| Crosstalk |
80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz |
| Switching speed |
200 ns (max.) |
|
| Video input — wideband video BME |
| Number/signal type |
Up to 32 or 64 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video |
| Connectors |
Female BNC (quantity varies with configuration) |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.5 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
|
| Video input — low resolution video BME |
| Number/signal type |
Up to 32 or 64 (varies with configuration) RGsB, RsGsBs, component video,
S-video, composite video, HDTV |
| Connectors |
Female BNC (quantity varies with model) |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum level |
Analog: 0.5 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
| External sync (genlock) |
0.3 V to 12 Vp-p, 75 ohms |
|
| Video output — wideband video BME |
| Number/signal type |
Up to 32 or 64 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video |
| Connectors |
Female BNC (quantity varies with configuration) |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Maximum level |
2 Vp-p |
| Impedance |
75 ohms |
| Return loss |
-25 dB to input section up to 50 MHz |
| DC offset |
±10 mV typical with input at 0 offset |
| Switching type |
Triple-Action™ |
| Slew rate |
>200 V/ms |
|
| Video output — low resolution video BME |
| Number/signal type |
Up to 32 or 64 (varies with configuration) RGsB, RsGsBs, component video,
S-video, composite video, HDTV |
| Connectors |
Female BNC (quantity varies with configuration) |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.5 V to 1.5 Vp-p |
| Impedance |
75 ohms |
| Return loss |
-40 dB to input section at 3.58 MHz/4.43 MHz |
| DC offset |
±10 mV maximum with input at 0 offset |
| Switching type |
Vertical interval |
| Slew rate |
>200 V/ms |
|
| Sync — sync BME |
| Input and output types |
Software configurable for RGBHV or RGBS |
| Sync connectors |
Up to 64 or 32 BNC female (quantity varies with configuration) |
| Input level |
0.5 V to 5 Vp-p (4 Vp-p nominal) |
| Output level |
5 Vp-p |
| Gain |
AGC to TTL : 4.0 V to 5.0 Vp-p |
| Input impedance |
Inputs 1 - 16: 510 ohms or 75 ohms, switchable
Inputs 17 - 64: 510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Polarity |
Positive or negative (follows input) |
|
| Audio — audio BME |
| Routing |
Up to 64 x 64 mono or stereo matrix (in increments of 8), balanced/unbalanced |
| Gain (selectable per output) |
Unbalanced output: 0 dB (as shipped), or -6 dB (jumper-selectable)
Balanced output: +6 dB (as shipped), or 0 dB (jumper-selectable) |
| Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise |
0.03% @ 20 Hz to 20 kHz, +15 dBu input, +21 dBu output nominal level |
| S/N |
>85 dB, balanced, at rated maximum output |
| Crosstalk |
<-70 dB @ 20 Hz to 20 kHz, fully loaded |
| Stereo channel separation |
>70 dB @ 20 Hz to 20 kHz |
| CMRR |
>+75 dB, 20 Hz to 20 kHz |
|
| Audio input — audio BME |
| Number/signal type |
(8 to 64) (in increments of 8) mono or stereo, balanced/unbalanced |
| Connectors |
(8 to 64) 3.5 mm captive screw connector, 5 pole (stereo) or 3 pole (mono) |
| Impedance |
>10k ohms unbalanced/balanced, DC coupled |
| Nominal level |
-10 dBV (316 mV) |
| Maximum level |
+21.5 dBu, (balanced or unbalanced) at 1%THD+N |
| Input gain adjustment |
-15 dB to +9 dB, adjustable per input via RS-232 control or front panel |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — audio BME |
| Number/signal type |
Up to 64 (in increments of 8) mono or stereo, balanced/unbalanced |
| Connectors |
3.5 mm captive screw connectors, 5 pole (stereo) or 3 pole (mono) (quantity varies with configuration) |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+26.0 dBu, balanced at 1%THD+N |
| Maximum level (600 ohm) |
>+24.0 dBm, balanced at 1%THD+N |
|
| Control/remote — switcher |
| Serial control port |
RS-232 or RS-422, Female 9-pin D connector |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
2 = TX, 3 = RX, 5 = GND |
| System intercommunications |
2 RJ-11 connectors |
| Remote key pad control |
(2) 5 mm, 5-pole captive screw connectors |
| Program control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
|
| General |
| Power* |
100 VAC to 240 VAC, 50-60 Hz; internal
Matrix 6400 wideband............ 110 watts at 115 VAC, 60 Hz
Matrix 3200 wideband............ 50 watts at 115 VAC, 60 Hz
Matrix 6400 video.................... 90 watts at 115 VAC, 60 Hz
Matrix 3200 video.................... 40 watts at 115 VAC, 60 Hz
Matrix 6400 sync...................... 65 watts at 115 VAC, 60 Hz
Matrix 3200 sync...................... 35 watts at 115 VAC, 60 Hz
Matrix 6400 audio.................... 195 watts at 115 VAC, 60 Hz
*A redundant power supply is available. |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Fan, left to right as viewed from front panel |
| Mounting |
|
| Rack mount |
Yes |
| Enclosure type |
Metal |
| 5U dimensions |
8.75" H x 17.0" W x 14.1" D (5U high, full rack wide)
22.2 cm H x 43.2 cm W x 35.8 cm D
(Depth excludes connectors. Width excludes rack ears.) |
| 7U dimensions |
12.25" H x 17.0" W x 14.1" D (7U high, full rack wide)
31.1 cm H x 43.2 cm W x 35.8 cm D
(Depth excludes connectors. Width excludes rack ears.) |
| Shipping/product weight, rack height |
Matrix 6400 wideband... 42 lbs (20 kg)/29.1 lbs (13.2 kg), 7U
Matrix 3200 wideband... 30 lbs (14 kg)/22.2 lbs (10.1 kg), 5U
Matrix 6400 video.......... 33 lbs (15 kg)/25.3 lbs (11.5 kg), 5U
Matrix 3200 video.......... 30 lbs (14 kg)/22.4 lbs (10.2 kg), 5U
Matrix 6400 sync........... 44 lbs (20 kg)/31.4 lbs (14.2 kg), 7U
Matrix 3200 sync........... 29 lbs (14 kg)/21.0 lbs (9.5 kg), 5U
Matrix 6400 audio......... 38 lbs (18 kg)/28.4 lbs (12.9 kg), 5U |
| DIM weight, international |
44 lbs (20 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, FCC Class A |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
