| CVEQ 100 Series |
|
| Video |
| Gain |
Composite video: -1 dB to +3 dB (x0.9 to x1.4), adjustable |
| Equalization |
0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable |
| Output cable driving distance |
Up to 1000' (300 m) with Extron MHR cable |
|
| Video input |
| Number/signal type |
1 composite video |
| Connectors |
|
| CVEQ 100 |
1 female BNC |
| CVEQ 100 D, CVEQ 100 AAP, CVEQ 100 MAAP |
1 female RCA |
| Nominal level |
1 Vp-p for composite video (including sync) |
| Minimum/maximum levels |
0.4 to 2.0 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Return loss |
<-25 dB @ 0 to 5 MHz |
| DC offset (max. allowable) |
4.0 V |
| Input coupling |
AC |
|
| Video output |
| Number/signal type |
1 composite video |
| Connectors |
|
| CVEQ 100 |
1 female BNC |
| CVEQ 100 D, CVEQ 100 AAP, CVEQ 100 MAAP |
1 female BNC attached via 4" pigtail |
| Nominal level |
1 Vp-p for composite video (including sync) |
| Minimum/maximum levels |
0.4 to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
| DC offset |
±5 mV with no input signal
Floating: +0.1 to -0.6 V, depending on input signal content |
|
| Sync |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio |
| Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise |
0.015% @ 1 kHz at nominal level |
| S/N |
>100 dB at maximum output (unweighted) |
| Stereo channel separation |
>80 dB @ 1 kHz |
| Output cable driving distance |
Up to 1000' (300 m) with Extron SHR cable |
|
| Audio input |
| Number/signal type |
1 stereo unbalanced |
| Connectors |
2 RCA female |
| Impedance |
20k ohms unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level |
+8 dBu (2.5 V), unbalanced at 1% THD+N |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output |
| Number/signal type |
|
| CVEQ 100 |
1 stereo, balanced/unbalanced |
| All other models |
1 stereo or dual mono (switch-selectable), balanced/unbalanced |
| Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Nominal level |
-10 dBV (316 mVrms), unbalanced; -2 dBu (632 mV), balanced output |
| Maximum level |
+9 dBV (2.8 V) unbalanced, +17 dBu (5.6 V) balanced at 1% THD+N with a 10k ohm load |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.2 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
|
| Rack mount |
| CVEQ 100 |
Yes, with optional 1U rack shelf |
| All other models |
No, but wall or furniture mountable |
| Furniture or wall mount |
|
| CVEQ 100 |
Yes, with optional mounting kits |
| CVEQ 100 D |
Yes, directly, or with a standard electrical wall box or mud ring |
| All other models |
Yes, with optional AAP or MAAP mounting faceplates |
| Enclosure type |
| CVEQ 100 |
Metal |
| CVEQ 100 D |
Metal rear enclosure, plastic faceplate |
| CVEQ 100 AAP |
Metal faceplate, open at rear |
| CVEQ 100 MAAP |
Metal faceplate, metal rear enclosure |
| Enclosure dimensions |
|
| CVEQ 100 |
1.0" H x 4.3" W x 3.0" D (<1U high, quarter rack wide)
(2.5 cm H x 11.0 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| CVEQ 100 D |
| Faceplate |
2.6" H x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora® faceplate. *Height is 3.8" [9.5 cm], including mounting tabs.)
(Depth excludes connectors.) |
| Device |
2.7" H x 1.8" W x 0.75" D
(6.9 cm H x 4.6 cm W x 1.9 cm D)
(Depth excludes connectors; height excludes mounting tabs.) |
| CVEQ 100 AAP |
|
| Faceplate |
1.4" H x 3.5" W x 0.1" D (3.6 cm H x 7.1 cm W x 0.3 cm D) (double space high AAP plate) |
| Device |
1.1" H x 2.8 " W x 1.2" D (2.8 cm H x 7.0 cm W x 3.0 cm D)
(Depth excludes connectors.) |
| CVEQ 100 MAAP |
|
| Faceplate |
2.1" H x 2.2" W x 0.1" D (5.3 cm H x 5.7 cm W x 0.3 cm D) (three space MAAP plate) |
| Device |
2.0" H x 1.4" W x 1.2" D (5 cm H x 3.6 cm W x 3.0 cm D)
(Depth excludes connectors.) |
| Product weight |
| CVEQ 100 |
0.7 lbs (0.3 kg) |
| All other models |
0.2 lbs (0.1 kg) |
| Shipping weight |
| CVEQ 100 |
3 lbs (2 kg) |
| All other models |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
