|
[14205]EXTRON 4in-4out SDI ¸ÅÆ®¸¯½º ½ºÀ§ÃÄ DXP 44 SDI [°¡°Ý¹®ÀÇ] |
|
|
|
|
100000ÀÌ»ó ±¸¸Å½Ã ¹«·á¹è¼Û
³³Ç°/³³±â °ßÀû¿äûÀº ÀüÈÁֽñ⠹ٶø´Ï´Ù. |
|
|
|
|
|
|
|
|
|
- SMPTE 259M compliant
- Inputs: Four SDI Serial Digital Interface signals on four female BNC connectors
- Outputs: Four SDI Serial Digital Interface signals on four female BNC connectors
- Inputs with buffered and equalized loop-throughs
- Outputs each with two buffered and equalized BNC connectors
- Capable of switching 4fsc or 4:2:2 serial digital video transmission standards
- Automatically accepts four SMPTE serial digital data rates: 143, 177, 270, and 360 Mbps
— The auto mode is ideal for multi-rate serial data protocols where the matrix switcher automatically detects and locks onto the incoming data signal.
- Automatic input cable equalization up to 300 meters at 270 Mbps
- Output data muting when input source is lost
— An internal muting function forces the serial data outputs to a static state when input data is not present or locked.
- 16 global memory presets
— These store commonly used switching configurations. Any preset may be recalled from the front panel or RS-232 control. When a preset is recalled, all the new I/O connections occur simultaneously.
- RS-232 and RS-422 control port
— Using serial commands, the DXP 44 SDI can be controlled and configured via the included Windows-based control software, or integrated into control systems. Extron products use the SIS¢â - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 and RS-422 port also makes it easy to install firmware updates.
- Optional control panels and keypads
— Provide the flexibility to control a DXP 44 SDI matrix switcher from a remote location.
- LCD display
— Displays current input/output configuration, preset configurations, and input carrier detect, as well as the status of additional system features.
- Control software
— Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
- 1U, rack-mountable metal enclosure
- Internal universal power supply
— The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility.
DXP 44 SDI, DXP 88 SDI |
|
Video |
Routing |
|
DXP 44 SDI |
4 x 4 matrix |
DXP 88 SDI |
8 x 8 matrix |
Data rates |
143 Mbps, 177 Mbps, 270 Mbps, 360 Mbps |
Auto data rate lock |
Yes |
Standard |
SMPTE 259M |
Data types |
8 bit or 10 bit |
|
Video input |
Number/signal type |
|
DXP 44 SDI |
4 SDI serial digital video (8 or 10 bit SMPTE 259 M widescreen 16:9, component 4:2:2, and composite video) inputs, and 4 buffered loop-throughs |
DXP 88 SDI |
8 SDI serial digital video (8 or 10 bit SMPTE 259 M widescreen 16:9, component 4:2:2, and composite video), and 8 buffered loop-throughs |
Connectors |
|
DXP 44 SDI |
4 female BNC for input, 4 female BNC for loop-through |
DXP 88 SDI |
8 female BNC for input, 8 female BNC for loop-through |
Input cable equalization |
1 to 300 m for data rates up to 270 Mbps 1 to 200 m for data rates up to 360 Mbps |
Auto equalization |
Yes |
Input return loss |
>15 dB, 5 MHz to 270 MHz |
Recommended cable type |
Extron SHR or equivalent |
Impedance |
75 ohm |
External sync (genlock) |
0.3 V to 0.4 Vp-p |
|
Video output |
Number/signal type |
|
DXP 44 SDI |
4 dual SDI serial digital video (SMPTE 259 M widescreen 16:9, component 4:2:2, and composite video) |
DXP 88 SDI |
8 dual SDI serial digital video (SMPTE 259 M widescreen 16:9, component 4:2:2, and composite video) |
Connectors |
|
DXP 44 SDI |
4 x 2 female BNC |
DXP 88 SDI |
8 x 2 female BNC |
Number of outputs per channel |
2 outputs per channel |
Nominal level |
0.8 V ¡¾10% |
Impedance |
75 ohms |
Return loss |
>40 dB @ 5 MHz |
DC offset |
¡¾500 mV maximum with input at 0 offset |
Jitter |
<0.2 µs p-p |
DC offset (termin. @ 75 ohms) |
0.5 V (¡¾) |
Rise and fall time (20-80%) |
0.6 ns = 100 ps |
|
Control/remote — switcher |
Serial control port |
RS-232 or RS-422, female 9-pin D connector |
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
Serial control pin configuration |
2 = TX, 3 = RX, 5 = GND |
Program control |
Extron control/configuration program for Windows¢ç Extron Simple Instruction Set (SIS¢â) |
|
General |
Power |
100 VAC to 240 VAC, 50-60 Hz, 40 watts, internal |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing |
Mounting |
|
Rack mount |
Yes, with included mounting brackets, 1U high |
Furniture mount |
Yes, under- or through-furniture mounting with included brackets |
Enclosure type |
Metal |
Enclosure dimensions |
1.75" H x 17.5" W x 9.5" D (1U high, full rack wide) 4.4 cm H x 44.4 cm W x 24.1 cm D (Depth excludes connectors. Width excludes rack ears.) |
Product weight |
4.9 lbs (2.2 kg) |
Shipping weight |
8 lbs (4 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES |
MTBF |
30,000 hours |
Warranty |
3 years parts and labor |
|
|
|
|
|
|