| CrossPoint 300 42 HVA |
|
| Video |
| Routing |
4 x 2 matrix |
| Gain |
Unity |
| Bandwidth |
300 MHz (-3 dB), fully loaded |
| 0 - 10 MHz |
No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz |
No more than +0.8 dB to -0.8 dB |
| Crosstalk |
-80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz |
| Switching speed |
200 ns (max.) |
|
| Video input |
| Number/signal type |
4 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors |
4 x 5 BNC female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.5 V |
|
| Video output |
| Number/signal type |
2 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video |
| Connectors |
2 x 5 BNC female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
±10 mV with input at 0 offset |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
| Input impedance |
75 or 510 ohms, switchable |
| Output impedance |
75 ohms |
| Max. input voltage |
5.0 Vp-p |
| Max. propagation delay |
30 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| Audio |
| Routing |
4 x 2 stereo matrix |
| Gain |
Unbalanced output: -6 dB; balanced output 0 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise |
0.03% @ 1 kHz at nominal level |
| S/N |
>90 dB, balanced, at maximum output (21 dBu) (unweighted) |
| Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>90 dB @ 1 kHz |
| CMRR |
>75 dB @ 20 Hz to 20 kHz |
|
| Audio input |
| Number/signal type |
4 stereo, balanced/unbalanced |
| Connectors |
(4) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
>10k ohm, balanced/unbalanced, DC coupled |
| Nominal level |
0 dBu (775 mV) |
| Maximum level |
+19.5 dBu, (balanced or unbalanced) at 0.01% THD+N |
| Input gain adjustment |
-18 dB to +24 dB (default = 0 dB), adjustable per input by RS-232 or front panel |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — audio models only |
| Number/signal type |
2 stereo, balanced/unbalanced |
| Connectors |
(2) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+21 dBu, balanced or unbalanced at 0.10% THD+N |
| Maximum level (600 ohm) |
>+15 dBm, balanced or unbalanced at 0.10% THD+N |
|
| Control/remote — switcher |
| Serial host control port |
1 RS-232, 9-pin female D connector |
| Baud rate and protocol |
9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| RS-232 |
9-pin female D connector: 2 = TX, 3 = RX, 5 = GND |
| Program control |
Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 40 watts, internal |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Rack mount |
Yes |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 17.5" W x 9.5" D (1U high, full rack wide)
(4.4 cm H x 44.5 cm W x 24.1 cm D)
(Depth excludes connectors, width excludes rack ears.) |
| Product weight |
4.9 lbs (2.2 kg) |
| Shipping weight |
8 lbs (4 kg) |
| DIM weight (International) |
9 lbs (5 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety |
CE, CUL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
