Features

• Inputs: Three female 15-pin HD connectors with 3.5 mm mini stereo jacks

• Outputs: One female 15-pin HD connector and one RJ-45 connector; audio on captive screw and 3.5 mm mini stereo jacks; summed mono audio on RJ-45 connector

• Selectable pre-peaking

• 300 MHz (-3 dB) RGB video bandwidth, fully loaded — Ensures switching of most high resolution signals without degradation.

• Optional MMX 32 AAP and MMX 32 MAAP remote control modules — Optional control modules provide remote input selection per output. The MMX 32 AAP is a single space AAP - Architectural Adapter Plate, while the MMX 32 MAAP is a single space MAAP - Mini Architectural Adapter Plate. Both include three input selection buttons with corresponding LED indicators.

• Built-in MTP transmitter

• Transmits RGBHV and audio signals 450 feet (135 meters) or more over CAT 5, 5e, or 6 cable

• Compatible with MTP RL 15HD A, MTP RL 15HD A SEQ, and MTP U Series receivers

• Buffered I/O — Each input and output is individually buffered to provide maximum performance with virtually no crosstalk.

• Supports HDTV component video, bi-level or tri-level sync

• Audio breakaway via RS-232 — Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio signals to be operated as a separate matrix switcher.

• RS-232 serial control port — Using serial commands, the MMX 32 VGA MTP can be controlled and configured via the included Windows-based control software, or integrated into third-party control systems. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 port also makes it easy to install firmware updates.

• Contact closure remote control with tally output status — Allows for remote selection of an input channel, while a tally output status LED provides feedback to indicate which input is currently selected.

• Front panel security lockout — Prevents unauthorized use in non-secure environments.

• Rack-mountable — 1U, half rack width metal enclosure can be rack-mounted using an optional rack shelf.

• External universal power supply included, replacement part # 70-775-01 — Provides worldwide power compatibility.
  
  

  Video
  Routing	3 x 2 matrix
  Gain	Unity
  Bandwidth	300 MHz (-3 dB), fully loaded 0 - 10 MHz: No more than +0.1 dB to -0.1 dB 0 - 130 MHz: No more than +2 dB to -0.1 dB
  Crosstalk	-55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
  Switching speed	200 ns (max.)
  Video input  — MMX 32 VGA A, MMX 32 VGA MTP transmitter
  Number/signal type	3 RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync), S-video, or composite video
  Connectors	3 female 15-pin HD
  Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and R-Y and B-Y of component video 0.3 Vp-p for C of S-video
  Minimum/maximum levels	Analog: -0.5 V to 2.0 Vp-p with no offset at unity gain
  Impedance	75 ohms
  Horizontal frequency	15 kHz to 145 kHz
  Vertical frequency	30 Hz to 170 Hz
  Return loss	<-42 dB @ 5 MHz
  DC offset (max. allowable)	4.0 V
  Video output  — MMX 32 VGA A, MMX 32 VGA MTP receivers
  Number/signal type	2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync), S-video, or composite video
  Connectors
  MMX 32 VGA A	1 female 15-pin HD 5 female BNC
  MMX 32 VGA MTP receivers	1 female 15-pin HD 1 female RJ-45 (for proprietary analog signals to be received by MTP R 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ)
  Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and R-Y and B-Y of component video 0.3 Vp-p for C of S-video
  Minimum/maximum levels	0.3 V to 2.0 Vp-p
  Impedance	75 ohms
  Return loss	<-30 dB @ 5 MHz
  DC offset
  MMX 32 VGA A	±5 mV maximum with input at 0 offset
  MMX 32 VGA MTP receivers	<±20 mV with input at 0 offset
  Sync
  Input type	RGBHV, RGBS, RGsB, RsGsBs
  Output type	RGBHV, RGBS, RGsB
  Input level	TTL: 2.5 V to 5.0 Vp-p, 4.0 Vp-p normal
  Output level	TTL: 4 V to 5 Vp-p, unterminated
  Input impedance	510 ohms
  Output impedance	75 ohms
  Max. input voltage	5 Vp-p
  Max. propagation delay	30 ns
  Max. rise/fall time	4.2 ns
  Polarity
  MMX 32 VGA A	Positive or negative (follows input)
  MMX 32 VGA MTP receivers	Positive or negative (selectable at receiver)
  Audio
  Routing	3 x 2 stereo matrix
  Gain
  MMX 32 VGA A
  Output 1	Unbalanced output: 0 dB
  Output 2	Unbalanced output: 0 dB; balanced output: +6 dB
  MMX 32 VGA MTP
  Output 1 (local output)	Unbalanced output: 0 dB
  Output 2a (CAT 5 receiver)	Unbalanced output: +0 dB; balanced output: +6 dB
  Output 2b	Unbalanced output: +0 dB; balanced output: +6 dB
  Frequency response	20 Hz to 20 kHz, ±0.05 dB
  THD + Noise
  MMX 32 VGA A	0.03% @ 1 kHz, 0.3% @ 20 kHz nominal level
  MMX 32 VGA MTP	0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
  S/N	>90 dB at maximum output (unweighted)
  Crosstalk
  MMX 32 VGA A	<-80 dB @ 1 kHz, fully loaded
  MMX 32 VGA MTP	<-76 dB @ 1 kHz, fully loaded
  Stereo channel separation
  MMX 32 VGA A	>-90 dB @ 1 kHz
  MMX 32 VGA MTP	>-76 dB @ 1 kHz
  CMRR	>-75 dB @ 20 Hz to 20 kHz
  Audio input  — MMX 32 VGA A, MMX 32 VGA MTP transmitter
  Number/signal type	3 stereo, PC level, unbalanced
  Connectors	(3) 3.5 mm mini stereo jacks
  Impedance
  MMX 32 VGA A	25k ohms balanced/unbalanced, DC coupled
  MMX 32 VGA MTP transmitter	>3k ohms, balanced/unbalanced AC coupled
  Nominal level	-10 dBV (316 mVrms)
  Maximum level	+8.5 dBu, (unbalanced) at 1%THD+N
  NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
  Audio output  — MMX 32 VGA A, MMX 32 VGA MTP receivers
  Number/signal type
  MMX 32 VGA A	2 stereo, balanced/unbalanced
  MMX 32 VGA MTP receivers	2 stereo, balanced/unbalanced, PC level 1 summed stereo-to-mono on RJ-45
  Connectors
  MMX 32 VGA A	(1) 3.5 mm mini stereo audio jack (unbalanced) (1) 3.5 mm captive screw connector, 5 pole
  MMX 32 VGA MTP receivers	(1) 3.5 mm mini-stereo audio jack (unbalanced) (1) 3.5 mm captive screw connector, 5 pole (1) RJ-45
  Impedance	50 ohms unbalanced, 100 ohms balanced
  Gain error	±0.1 dB channel to channel
  Maximum level (Hi-Z)
  MMX 32 VGA A	Program audio: >+21 dBu, balanced or unbalanced at 1% THD+N
  MMX 32 VGA MTP receivers, output 2	>+17 dBu, balanced or unbalanced at 1% THD+N
  Maximum level (600 ohm)
  MMX 32 VGA A	Program audio: >+14 dBm, balanced or unbalanced at 1% THD+N
  MMX 32 VGA MTP receivers, output 2	>+14 dBm, balanced or unbalanced at 1% THD+N
  Control/remote — switcher
  Serial control port
  MMX 32 VGA A	RS-232, female 9-pin D connector
  MMX 32 VGA MTP	RS-232, 3.5 mm captive screw connector, 3 pole
  Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
  Serial control pin configurations
  MMX 32 VGA A	2 = TX, 3 = RX, 5 = GND
  MMX 32 VGA MTP	1 = TX, 2 = RX, 3 = GND
  Contact closure
  MMX 32 VGA A	1 female 9-pin D connector (also used as the serial control port)
  MMX 32 VGA MTP	(2) 3.5 mm captive screw connectors, 5 pole
  Contact closure pin configurations
  MMX 32 VGA A	Output 1: 1= input 1, 4 = input 2, 6 = input 3, 5 = GND Output 2: 7= input 1, 8 = input 2, 9 = input 3, 5 = GND
  MMX 32 VGA MTP	Output 1: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC Output 2: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
  Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
  General
  External power supply	100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 2 A, regulated
  Power input requirements	12 VDC, 0.7 A
  Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
  Cooling	Convection, no vents
  Mounting
  Rack mount	Yes, with optional 1U rack shelf
  Furniture mount	Yes, with optional under-desk mounting kit
  Enclosure type	Metal
  Enclosure dimensions
  MMX 32 VGA A	1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.)
  MMX 32 VGA MTP	1.75" H x 8.75" W x 6.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 15.24 cm D (Depth excludes connectors.)
  Product weight
  MMX 32 VGA A	2.5 lbs (1.1 kg)
  MMX 32 VGA MTP	2.5 lbs (1.1 kg) (The twisted pair receiver is sold and shipped separately.)
  Shipping weight	5 lbs (2.3 kg) per MMX 32 VGA A or per MMX 32 VGA MTP transmitter
  Vibration	ISTA 1A in carton (International Safe Transit Association)
  Regulatory compliance
  Safety	CE, c-UL, UL
  EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
  MTBF	30,000 hours
  Warranty	3 years parts and labor