| RGB 203 Rxi, RGB 203 Rxi VTG |
|
| Video |
| Routing |
3 x 1 router |
| Gain |
0.5 V to 1.45 Vp-p |
| Bandwidth |
300 MHz (-3 dB) |
| Rise time |
1.5 ns |
|
| Video input |
| Number/signal type |
3 analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
3 female 15-pin HD |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
40 Hz to 140 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
4 V |
|
| Video output |
| Number/signal type |
1 analog RGBHV, RGBS, RGsB |
| Connectors |
6 BNC female |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0.3 V to 1.30 Vp-p |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
| DC offset |
±5 mV maximum with input at 0 offset |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB |
| Input level |
2 V to 5.5 Vp-p with ±0.2 VDC offset max. |
| Output level |
TTL: 4V to 5V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
85 ns |
| Max. rise/fall time |
2 ns |
| Polarity |
RGBHV: tracks polarity (or force negative sync via internal jumper)
RGBS, RGsB: negative |
|
| Audio |
| Routing |
2 x 1 stereo router |
| Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
>90 dB at rated maximum output (17 dBu), balanced (unweighted) |
| Crosstalk |
<-90 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>90 dB @ 1 kHz |
|
| Audio input |
| Number/signal type |
2 PC level stereo, unbalanced |
| Connectors |
(2) 3.5 mm mini audio jacks (female) |
| Impedance |
>10k ohms, unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level |
+8.5 dBu, (balanced or unbalanced) at 1% THD+N |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output |
| Number/signal type |
1 buffered stereo (2 channel) or mono, balanced/unbalanced |
| Connectors |
(1) 3.5 mm, captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+14 dBu, balanced at 1% THD+N |
| Maximum level (600 ohm) |
>+8.5dBm, balanced at stated %THD+N |
|
| Control/remote — interface |
| Serial control port |
RS-232, 9-pin female D connector (also used for contact closure) |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
2 = TX, 3 = RX, 5 = GND |
| Contact closure |
(1) 9-pin female D connector (also used for RS-232) |
| Contact closure pin configuration |
1 = input #1, 4 = input #2, 5 = GND |
| Program control |
Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
| Input power |
100 VAC to 240 VAC, 50/60 Hz, 18 watts, internal, autoswitchable |
| MBC power jacks |
9.0 VDC, 0.15 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01
Also furniture mountable with an optional under-desk mounting kit (part #70-077-01) or through-desk mounting kit (part #70-077-02) |
| Enclosure type |
Metal, vented |
| Enclosure dimensions |
1.75" H x 8.75" W x 8.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 20.3 cm D; with rear BNCs, D = 8.4" (21.3 cm)
(Depth excludes knobs.) |
| Product weight |
|
| RGB 203 Rxi |
2.2 lbs (1.0 kg) |
| Shipping weight |
5 lbs (3 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
