| Video |
| Gain |
Unity |
| Bandwidth |
350 MHz (-3 dB), fully loaded |
|
| Video input |
| Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video |
| Connectors |
1 female 15-pin HD (optional Mac/VGA adapters are available) |
| Pin connections |
ID bits on pins 4, 11, 12, and 15 are passed through to output 1.
The pin 9 connection is passed through to output 1. |
| Nominal level |
1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 135 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-40 dB @ 5 MHz |
| Input coupling |
DC |
|
| Video output |
| Number/signal type |
8 or 12 (depending on model) VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type) |
| Connectors |
8 or 12 female 15-pin HD |
| Nominal level |
1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input)
Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other component video rates) |
| Input level |
1.8 V to 5.0 Vp-p |
| Output level |
TTL: 5.0 Vp-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
50 ohms |
| Max. propagation delay |
60 ns |
| Max. rise/fall time |
2 ns |
| Polarity |
Positive or negative (follows input) |
|
| Audio — audio (A) models only |
| Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response |
10 Hz to 20 kHz, ±0.2 dB |
| THD + Noise |
0.03% @ 1 kHz at nominal level |
| S/N |
>90 dB at maximum output (unweighted) |
| Crosstalk |
<-45 dB @ 1 kHz |
| Stereo channel separation |
>80 dB @ 1 kHz |
|
| Audio input — audio (A) models only |
| Number/signal type |
1 stereo, unbalanced |
| Connectors |
(1) 3.5 mm mini audio jack (tip, ring, sleeve) |
| Impedance |
>10 k ohms unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level |
+16 dBu, (unbalanced) at 1% THD+N |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — audio (A) models only |
| Number/signal type |
8 or 12 (depending on model) stereo, balanced/unbalanced |
| Connectors |
(8 or 12) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (Hi-Z) |
>+28 dBu balanced, >+20 dBV unbalanced at 1% THD+N |
| Maximum level (600 ohm) |
>+21 dBm balanced, >+18 dBm unbalanced at 1% THD+N |
|
| Control/remote — distribution amplifier |
| Contact closure mute control |
(2) 3.5 mm captive screw connectors, 4 pole, and
(2) 3.5 mm captive screw connectors, 3 pole |
| Contact closure pin configuration |
|
| 8-output models |
A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 8 = mute output 8 |
| 12-output models |
A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 12 = mute output 12 |
|
| General |
| Power |
100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
|
| Rack mount |
Yes, with included brackets |
| Furniture mount |
Yes, with optional under-desk mounting kit |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.6" H x 17.4" W x 8.5" D (1U high, full rack wide)
(4.1 cm H x 44.2 cm W x 21.6 cm D)
(Depth excludes connectors.) |
| Product weight |
6.0 lbs (2.7 kg) |
| Shipping weight |
9 lbs (5 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
