| CrossPoint 450 Plus 64 Series |
|
| Video |
| Routing |
64 x 64, 64 x 48, 64 x 32, 48 x 64, 48 x 48, 48 x 32, 32 x 48, or 32 x 64 matrix |
| Gain |
Unity |
| Bandwidth |
450 MHz (-3 dB), fully loaded |
| 0 - 10 MHz |
No more than +0.1 dB to -0.1 dB |
| 0 - 130 MHz |
No more than +0.8 dB to -0.8 dB |
| Crosstalk |
-80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz |
| Switching speed |
200 ns (max.) |
|
| Video input |
| Number/signal type |
32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video |
| Connectors |
32, 48, or 64 BNC female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.5 V |
|
| Video output |
| Number/signal type |
32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video |
| Connectors |
32, 48, or 64 BNC female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Switching type |
Triple-Action™ |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated |
| Input impedance |
Inputs 1 to 16: 75 or 510 ohms, switchable
Inputs 17 to 32, 48, or 64: 510 ohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
30 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| Audio — See MAV Plus 64 Series audio models |
|
| Audio input — See MAV Plus 64 Series audio models |
|
| Audio output — See MAV Plus 64 Series audio models |
|
| Control/remote — switcher |
| Serial control port |
1 RS-232 or RS-422, 9-pin female D connector (rear panel)
1 RS-232-only 2.5 mm phone jack (front panel) |
| Baud rate and protocol |
|
| 9-pin D connector |
9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity |
| 2.5 mm phone jack |
9600 baud; 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
| 9-pin D connector |
RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+ |
| 2.5 mm phone jack |
Tip = TX, ring = Rx, sleeve = GND |
| Ethernet control port |
1 RJ-45 female connector |
| Ethernet data rate |
10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol |
ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP |
| Program control |
Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer, Telnet |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, internal, primary and redundant
(64 or 48) x (32, 48, or 64) wideband: 110 watts at 115 VAC, 60 Hz
32 x (48 or 64) wideband: 50 watts at 115 VAC, 60 Hz
(64 x 64) sync: 65 watts at 115 VAC, 60 Hz |
| NOTE |
A redundant power supply is standard. | |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, vents on right and left sides |
| Rack mount |
Yes, with included parts |
| Enclosure type |
Metal |
| Enclosure dimensions |
10.5" H x 17.0" W x 14.1" D (6U high, full rack wide)
(26.7 cm H x 43.2 cm W x 35.8 cm D) |
| Product weight per BME |
|
| 32 x 48 through 64 x 64 Series wideband video BMEs |
| |
18.0 lbs (8.2 kg) |
| Shipping weight per BME |
|
| 32 x 48 through 64 x 64 Series wideband video BMEs |
| |
30 lbs (14 kg) |
| 32 x 48 through 64 x 64 Series sync BMEs |
| |
29 lbs (13 kg) |
| DIM weight, international |
per BME
44 lbs (20 kg) |
| NOTE |
An RGBHV system is shipped as 5 BMEs in 5 cartons. | |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety |
CE, CUL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
All nominal levels are at ±10%. | |
| NOTE |
Specifications are subject to change without notice. |
Click to zoom in (Flash player 8 or higher required)
Also see our  DWG panel drawing |
