|
[15168]EXTRON DVS 510 SA [º¹ÇÕ´ÜÀÚ ½ºÄÉÀÏ·¯] [°¡°Ý¹®ÀÇ] |
|
|
|
|
100000ÀÌ»ó ±¸¸Å½Ã ¹«·á¹è¼Û
³³Ç°/³³±â °ßÀû¿äûÀº ÀüÈÁֽñ⠹ٶø´Ï´Ù. |
|
|
|
|
|
|
|
|
|
DVS 510 |
Variable Preamp Output - No Amplifier |
60-835-01 |
|
|
|
|
|
DVS 510 SA |
2x25 Watt Stereo Power Amplifier |
60-835-02 |
DVS 510 Series |
|
Video |
Signal types and standards |
|
Signal type |
Single-link DVI digital video signals are supported. |
Digital video |
RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video) |
Digital audio |
Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
HDCP |
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards |
EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
Standards |
DVI 1.0, HDMI 1.3, HDCP 1.1 |
|
Video input |
Number/signal type |
2 composite video 2 S-video 4 RGBHV, RGBS, and component video (interlaced, progressive, or HDTV) 2 DVI-D digital video (single link) |
Connectors |
2 female BNC (composite video) 2 female 4-pin mini DIN (S-video) 2 female 15-pin HD (RGB/component video) 2 female DVI-I (digital and analog signals are accepted) |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels |
0 V to 1.0 Vp-p with no offset |
Impedance |
75 ohms |
Horizontal frequency |
24 kHz to 100 kHz |
Vertical frequency |
50 Hz to 120 Hz |
Resolution range |
640 x 480 to 1920 x 1200*, 480p, 576p, 720p, 1080i, and 1080p, sampled pixel for pixel Higher resolutions are accepted and undersampled. |
|
* Reduced blanking version |
Return loss |
<-30 dB @ 5 MHz |
DC offset (max. allowable) |
0.5 V |
|
Video processing |
Decoder |
10 bit digital |
Digital sampling |
30 bit, 10 bits per color; 165 MHz standard |
Colors |
1 billion |
|
Video output |
Number/signal type |
1 scaled RGBHV, RGBS, RGsB; Y, R-Y, B-Y |
Connectors |
2 female 15-pin HD 1 female DVI-I (HDCP; only digital signal active) |
Nominal level |
1 Vp-p for Y of component video and for G of RGsB 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
Minimum/maximum levels |
0 V to 0.7 Vp-p |
Impedance |
75 ohms |
Vertical frequency |
50 Hz, 60 Hz, or 75 Hz, depending on selected output resolution |
Scaled resolution |
640x4801,2,3, 800x6001,2,3, 852x4801,2,3, 1024x7681,2,3, 1024x8521,2,3, 1024x10241,2,3, 1280x7681,2, 1280x8001,2, 1280x10241,2,3, 1360x7651,2,3, 1360x7681,2,3, 1365x7681,2,3, 1366x7681,2,3, 1365x10241,2,3, 1400x10501,2, 1440x9001,2,3, 1600x12001,2, 1680x10501,2, 1920x12001,2, 2048x10801,2,4,5,6,7,8,9, 480p2,9, 576p1, 720p1,2,6,7,8,9, 1080i1,2,9, 1080p1,2,4,5,6,7,8,9 1 = at 50 Hz, 2 = at 60 Hz, 3 = at 75 Hz, 4 = at 23.98 Hz, 5 = at 24 Hz, 6 = at 25 Hz, 7 = at 29.97 Hz, 8 = at 30 Hz, 9 = at 59.94 Hz |
Return loss |
-21 dB @ 5 MHz |
DC offset |
¡¾300 mV maximum with input at 0 offset |
|
Sync |
Input type |
RGBHV, RGBS, RGsB, bi-level or tri-level component video |
Output type |
RGBHV, RGBS, RGsB; Y, R-Y, B-Y (bi-level or tri-level) |
Input standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
Input level |
2.75 Vp-p to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB |
Output level |
TTL: 5.0 Vp-p, unterminated 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB |
Input impedance |
75 ohms |
Output impedance |
75 ohms |
Polarity |
Positive or negative (selectable) |
|
Audio |
Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response |
Fix and variable: 20 Hz to 20 kHz, ¡¾0.5 dB Direct (4/8 ohms): 20 Hz to 20 kHz, ¡¾1.0 dB |
THD + Noise |
Power amp: 0.01% at 1 kHz at nominal level (1 watt, 8 ohms load) Variable: <0.11% at 1 kHz, 20 kHz bandwidth Fixed: <0.025% at 1 kHz, 20 kHz bandwidth |
S/N |
Power amp: 72 dB at 20 to 20 kHz Variable: 90 dB at rated maximum output Fixed: 90 dB at rated maximum output |
Crosstalk |
-80 dB at 1 kHz, fully loaded |
Stereo channel separation |
84 dB at 1 kHz |
Bass |
¡¾10 dB at 100 Hz |
Treble |
¡¾10 dB at 10 kHz |
|
Audio input |
Number/signal type |
10 stereo, unbalanced |
Connectors |
(10) 3.5 mm 5-pole captive screw connectors (stacked) |
Impedance |
>10k ohms unbalanced, DC coupled |
Nominal level |
+4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
Maximum level |
+10.4 dBu, (unbalanced) at 1% THD+N |
Input gain adjustment |
-12 dBu to +12 dBu, adjustable to input |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
Audio output |
Number/signal type |
2 stereo or mono, balanced/unbalanced (1 fixed and 1 variable) |
Connectors |
(2) 3.5 mm captive screw connectors, 5-pole |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
¡¾0.1 dB channel to channel |
Maximum level (Hi-Z) |
>+21 dBu, balanced at 1% THD+N >+11 dBu, unbalanced at 1% THD+N |
Maximum level (600 ohm) |
>+14 dBm, balanced at 1% THD+N >+10 dBm, unbalanced at 1% THD+N |
|
Audio output — amplified (optional) |
Number/signal type |
1 stereo or mono (2 channels total) |
Connectors |
(1) 5 mm captive screw, 4-pole |
Minimum load impedance |
4 ohms |
Continuous power with a full load |
At 2, 4, or 8 ohms: 25 watts (rms) per channel |
Amplifier type |
Improved Class D |
Damping factor |
>30 (with a 4 ohm load) |
|
Control/remote — decoder/scaler |
Serial control port |
2 RS-232: 1 rear panel female 9-pin D connector 1 front panel 2.5 mm stereo mini jack |
IR remote control |
IR 904 (optional) 30' maximum, 40 degrees off axis |
|
General |
Power |
100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Fan, right to left as viewed from front panel |
Mounting |
|
Rack mount |
Yes, with included brackets |
Enclosure type |
Metal |
Enclosure dimensions |
3.5" H x 17.5" W x 9.4" D (2U high, full rack wide) (8.9 cm H x 44.4 cm W x 23.9 cm D) (Depth excludes connectors and knobs. Width excludes mounting brackets.) |
Product weight |
7.0 lbs (3.2 kg) |
Shipping weight |
10 lbs (5 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
MTBF |
30,000 hours |
Warranty |
3 years parts and labor | |
|
|
|
|
|