DVS 510	Variable Preamp Output - No Amplifier	60-835-01
	DVS 510 SA	2x25 Watt Stereo Power Amplifier	60-835-02

DVS 510 Series
Video
Signal types and standards
Signal type	Single-link DVI digital video signals are supported.
Digital video	RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video)
Digital audio	Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
HDCP	Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
EDID and DDC	Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
Standards	DVI 1.0, HDMI 1.3, HDCP 1.1
Video input
Number/signal type	2 composite video 2 S-video 4 RGBHV, RGBS, and component video (interlaced, progressive, or HDTV) 2 DVI-D digital video (single link)
Connectors	2 female BNC (composite video) 2 female 4-pin mini DIN (S-video) 2 female 15-pin HD (RGB/component video) 2 female DVI-I (digital and analog signals are accepted)
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0 V to 1.0 Vp-p with no offset
Impedance	75 ohms
Horizontal frequency	24 kHz to 100 kHz
Vertical frequency	50 Hz to 120 Hz
Resolution range	640 x 480 to 1920 x 1200*, 480p, 576p, 720p, 1080i, and 1080p, sampled pixel for pixel Higher resolutions are accepted and undersampled.
	* Reduced blanking version
Return loss	<-30 dB @ 5 MHz
DC offset (max. allowable)	0.5 V
Video processing
Decoder	10 bit digital
Digital sampling	30 bit, 10 bits per color; 165 MHz standard
Colors	1 billion
Video output
Number/signal type	1 scaled RGBHV, RGBS, RGsB; Y, R-Y, B-Y
Connectors	2 female 15-pin HD 1 female DVI-I (HDCP; only digital signal active)
Nominal level	1 Vp-p for Y of component video and for G of RGsB 0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels	0 V to 0.7 Vp-p
Impedance	75 ohms
Vertical frequency	50 Hz, 60 Hz, or 75 Hz, depending on selected output resolution
Scaled resolution	640x4801,2,3, 800x6001,2,3, 852x4801,2,3, 1024x7681,2,3, 1024x8521,2,3, 1024x10241,2,3, 1280x7681,2, 1280x8001,2, 1280x10241,2,3, 1360x7651,2,3, 1360x7681,2,3, 1365x7681,2,3, 1366x7681,2,3, 1365x10241,2,3, 1400x10501,2, 1440x9001,2,3, 1600x12001,2, 1680x10501,2, 1920x12001,2, 2048x10801,2,4,5,6,7,8,9, 480p2,9, 576p1, 720p1,2,6,7,8,9, 1080i1,2,9, 1080p1,2,4,5,6,7,8,9 1 = at 50 Hz, 2 = at 60 Hz, 3 = at 75 Hz, 4 = at 23.98 Hz, 5 = at 24 Hz, 6 = at 25 Hz, 7 = at 29.97 Hz, 8 = at 30 Hz, 9 = at 59.94 Hz
Return loss	-21 dB @ 5 MHz
DC offset	±300 mV maximum with input at 0 offset
Sync
Input type	RGBHV, RGBS, RGsB, bi-level or tri-level component video
Output type	RGBHV, RGBS, RGsB; Y, R-Y, B-Y (bi-level or tri-level)
Input standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level	2.75 Vp-p to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB
Output level	TTL: 5.0 Vp-p, unterminated 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB
Input impedance	75 ohms
Output impedance	75 ohms
Polarity	Positive or negative (selectable)
Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	Fix and variable: 20 Hz to 20 kHz, ±0.5 dB Direct (4/8 ohms): 20 Hz to 20 kHz, ±1.0 dB
THD + Noise	Power amp: 0.01% at 1 kHz at nominal level (1 watt, 8 ohms load) Variable: <0.11% at 1 kHz, 20 kHz bandwidth Fixed: <0.025% at 1 kHz, 20 kHz bandwidth
S/N	Power amp: 72 dB at 20 to 20 kHz Variable: 90 dB at rated maximum output Fixed: 90 dB at rated maximum output
Crosstalk	-80 dB at 1 kHz, fully loaded
Stereo channel separation	84 dB at 1 kHz
Bass	±10 dB at 100 Hz
Treble	±10 dB at 10 kHz
Audio input
Number/signal type	10 stereo, unbalanced
Connectors	(10) 3.5 mm 5-pole captive screw connectors (stacked)
Impedance	>10k ohms unbalanced, DC coupled
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level	+10.4 dBu, (unbalanced) at 1% THD+N
Input gain adjustment	-12 dBu to +12 dBu, adjustable to input
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type	2 stereo or mono, balanced/unbalanced (1 fixed and 1 variable)
Connectors	(2) 3.5 mm captive screw connectors, 5-pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Maximum level (Hi-Z)	>+21 dBu, balanced at 1% THD+N >+11 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)	>+14 dBm, balanced at 1% THD+N >+10 dBm, unbalanced at 1% THD+N
Audio output  — amplified (optional)
Number/signal type	1 stereo or mono (2 channels total)
Connectors	(1) 5 mm captive screw, 4-pole
Minimum load impedance	4 ohms
Continuous power with a full load	At 2, 4, or 8 ohms: 25 watts (rms) per channel
Amplifier type	Improved Class D
Damping factor	>30 (with a 4 ohm load)
Control/remote — decoder/scaler
Serial control port	2 RS-232: 1 rear panel female 9-pin D connector 1 front panel 2.5 mm stereo mini jack
IR remote control	IR 904 (optional) 30' maximum, 40 degrees off axis
General
Power	100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Fan, right to left as viewed from front panel
Mounting
Rack mount	Yes, with included brackets
Enclosure type	Metal
Enclosure dimensions	3.5" H x 17.5" W x 9.4" D (2U high, full rack wide) (8.9 cm H x 44.4 cm W x 23.9 cm D) (Depth excludes connectors and knobs. Width excludes mounting brackets.)
Product weight	7.0 lbs (3.2 kg)
Shipping weight	10 lbs (5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
MTBF	30,000 hours
Warranty	3 years parts and labor