|
새 페이지 1
새 페이지 1
The Extron USP 405 Universal Signal Processor is the one box solution for all
video signal conversion needs. It is an all-in-one, high-performance scaler,
scan converter, transconverter, format converter, switcher, and transcoder. The
USP 405 accepts a wide range of video signal formats, processes them, and
outputs them all in one format directly to a digital display, projector, or
editing device. The applications for the USP 405 include rental and staging
environments, boardrooms, conference rooms, classrooms, auditoriums, and much
more.
The USP 405 is especially useful for upconverting or downconverting video and
computer-video. It can convert HDTV, component video, S-video, NTSC and PAL
composite video, RGB, and optional SDI - Serial Digital Interface into a single
video format — all while maintaining maximum image quality. RGB signals
that are input into the USP 405 can be scaled to one of 41 output resolutions,
or scan converted to component video, S-video, NTSC and PAL composite video, and
SDI. Video signals that are input as component, S-video, composite, and SDI can
be transcoded by the USP 405 and output through all video connectors
simultaneously. These video signals can also be scaled to one of 41 resolutions
and output on 15-pin HD and BNC connectors.
There are five video inputs on the USP 405, including optional SDI input,
accessible through the rear panel: one female 15-pin HD connector for RGB with a
buffered local monitor output; five female BNC connectors for RGB,
HDTV/component video, S-video, or composite video; one 4-pin mini DIN for
S-video with a buffered loop-through; one female BNC for composite video with a
buffered loop-through; and one female BNC for the optional SDI video.
The USP 405 has six video outputs, including optional SDI output, also on the
rear panel: one female 15-pin HD connector and five female BNC connectors for
RGB and HDTV/component video; three female BNC connectors for component video;
one 4-pin mini DIN for S-video; one female BNC connector for composite video;
and one female BNC connector for the optional SDI video.
To maximize the quality of the output image, the USP 405 features several
Extron proprietary video processing technologies: DMI™ - Dynamic Motion
Interpolation, 3:2 NTSC and 2:2 PAL pulldown detection, and the patented AFL™
- Accu-RATE Frame Lock.
The USP 405 is available in two configurations: the standard USP 405, and the
USP 405 DI/O with SDI input and output. This universal signal processor comes
with an easy-to-read LCD menu and back-lit, tactile buttons to simplify
operation and control. It can also be controlled by IR remote with the optional
Extron IR 801.
- All-in-one
scaler, scan converter, transcoder, format converter, and transconverter
- Inputs:
Five total - RGBHV on female 15-pin HD with buffered local monitor
loop-through; RGBHV, HDTV, S-video, composite, or component video on five
female BNCs; composite video on female BNC with buffered loop-through;
S-video on 4-pin mini DIN with buffered loop-through; optional SDI - Serial
Digital Interface on female BNC
- Outputs:
Six total - optional SDI on female BNC; component video on three female
BNCs; composite video on female BNC; S-video on 4-pin mini DIN; RGBHV, HDTV,
or component video on six female BNCs; RGBHV on female 15-pin HD
41
selectable output rates from 640x480 to 1400x1050, including HDTV 1080p/60
— The USP 405 offers 41 scaled output rates, including these
computer-video and plasma rates: 640x480, 800x600, 832x624, 848x480, 852x480,
1024x768, 1280x768, 1280x1024, 1360x765, 1365x1024, and 1400x1050. NTSC, PAL,
as well as HDTV rates of 720p, 1080i, and 1080p/60 are also available.
- Quad
standard video decoding
— The DVS 406 uses a digital,
four-line adaptive comb filter to decode NTSC 3.58, NTSC 4.43, PAL, and SECAM
for integration in systems worldwide.
- Input
RGB signals can be scaled or scan converted
— RGB
signals can be scaled to one of 41 output rates or scan converted to
component, S-video, composite, and SDI - either NTSC or PAL.
- Input
video signals can be scaled or transcoded
— Input
component, S-video, composite, and SDI signals can be transcoded and output on
all connectors in each format simultaneously, or scaled to one of 41
resolutions and output on BNCs or 15-pin HD.
- Patented
3:2 NTSC and 2:2 PAL pulldown detection
— Advanced film
mode processing techniques which help maximize image detail and sharpness for
NTSC or PAL sources that originated from film.
- Aspect
ratio conversion
— Ability to horizontally and
vertically size any video input to meet a specific aspect ratio.
- Optional
SDI input and output
— The USP 405 is available with
SDI input and output - USP 405 DI/O.
- AFL™
- Patented Accu-RATE Frame Lock
— A patented technology
exclusive to Extron that solves frame rate conversion issues experienced by
video scalers. When video input and output refresh rates differ, there are
certain points in time when the two rates cross over each other. The result is
a glitch or image freeze on the display. AFL solves this problem by locking
the output frame rate to the input frame rate.
- DMI™
- Dynamic Motion Interpolation
— DMI technology is an
advanced motion detection and compensation method used to deliver the best
aspects of still and motion algorithms. This process results in a superior
level of image enhancement capability with no loss of image fidelity.
- Buffered
loop-through inputs
— Input one has a buffered local
monitor output on a female 15-pin HD connector, and inputs three and four
include buffered loop-through connectors on a female BNC and a 4-pin mini DIN
connector, respectively.
- Video
genlock
— All video outputs - NTSC and PAL - can be
synchronized to an external reference signal for integration into broadcast
and production applications.
Internal
test patterns for calibration and set-up — Ten test
patterns are available, including a crop pattern, crosshatch, 16 bar gray
scale, color bars, alternating pixels, ramp, 4 x 4 crosshatch for use with
video walls, and three film aspect ratio patterns - 1.78, 1.85, and 2.35 - for
setting up letterbox DVDs. It also features a blue-only mode for proper setup
of video color and tint levels.
- Input
freeze control
— Each input of the USP 405 can be
frozen using the freeze button on the front panel. When the freeze is pressed,
it will light red and the input that is selected will flash. Once an input has
been frozen, the input to the unit can be removed and the frozen output image
will not be lost until another source has been selected.
- Picture
controls for brightness, contrast, centering, color, tint, detail, size,
zoom, and panning
- 32
auto-recall memory presets
— Inputs one and two support
32 auto-recall memory presets each, based on incoming frequency. Information
on sizing, centering, detail, contrast, and brightness is saved.
- Variable
top and bottom vertical blanking
— Eliminates edge
noise caused by tapehead switching and captioning.
- RS-232
serial control port
— Using serial commands, the USP
405 can be controlled and configured via the Extron Windows®-based control
program, or integrated into third-party control systems. Extron products use
the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII
code commands that allow for quick and easy programming.
- Front
panel security lockout
— This feature locks out all
front panel functions except basic switching; all functions however, are
available through RS-232 control.
- Rack-mountable
1U, full rack width metal enclosure - mounting brackets included
- Internal
international power supply
— The 100-240VAC, 50/60 Hz,
universal power supply provides worldwide power compatibility.
| USP 405 Universal Signal Processor |
|
| Video |
| Gain |
Unity |
| Crosstalk |
-50 dB @ 5 MHz |
|
| Video input |
| Number/signal type |
1 RGBHV/RGBS/RGsB computer video with 1 local monitor
loop-through |
|
1 RGBHV/RGBS/RGsB, RGBcvS computer video, component video
(Y, R-Y, B-Y), S-video, or composite video
1 S-video
1 composite video
1 SDI (optional) |
| Connectors |
(2) 15-pin HD female: RGB computer video input and
loop-through
1 x 5 BNC female: RGB computer video, component video, S-video, or
composite video input
2 BNC female: composite video input and loop-through
(2) 4-pin mini DIN female: S-video input and loop-through
1 BNC female: optional SDI digital component video input |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.3 V to 2 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
|
| Input
1 |
24 kHz to 100 kHz |
| Input
2 RGB, HD component video |
24 kHz to 100 kHz |
| Input
2 RGBS, RGBcvS, component video, S-video, composite video |
15 kHz |
| Inputs
3 & 4 |
15 kHz |
| Input
5 |
CCIR 601/ITU‑R BT.601 (270 Mbps) |
| Vertical frequency |
30 Hz to 120 Hz |
| Resolution range |
Autoscan 640 x 480 to 1600 x 1200 |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
0.5 V |
| External sync (genlock) |
0.3 V to 1.0 Vp-p |
|
| Video processing |
| Decoder |
9 bit digital |
| Encoder |
10-bit digital |
| Digital sampling |
24 bit, 8 bits per color; 140 MHz |
| Colors |
16.78 million |
| Horizontal filtering |
8 levels |
| Vertical filtering |
8 levels |
|
| Video output |
| Number/signal type |
6 RGBHV, RGBS, component video (Y, R-Y, B-Y), optional SDI
digital component video (CCIR 601/ITU‑R BT.601), S-video,
composite video |
| Connectors |
1 x 6 BNC female (RGB, HD component video)
(1) 15-pin HD female (RGB, HD component video)
3 BNC female (component video)
(1) 4-pin mini DIN (S-video)
1 BNC female (composite video)
1 BNC female (optional SDI digital component video) |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0 V to 2.0 Vp-p |
| Impedance |
75 ohms |
| Scaled resolutions |
640x4801,3,4,6, 800x6001,3,4,6,
832x6243,4,6, 848x4803,6, 852x4803,6,
1024x7681,3,4,5,6, 1280x7682,6, 1280x10241,3,6,
1360x7653,6, 1365x10243,6, 1400x10501,3,6,
576p1,6, 720p3,6, 1080p3,6, 1080i1,3,6,
NTSC, PAL
1 = at 50 Hz 2 = at 56 Hz 3 = at 60 Hz 4
= at 75 Hz 5 = at 85 Hz
6 = locked to the current input's vertical refresh rate (up to 60
Hz) (Accu-RATE Frame Lock) |
| Return loss |
-30 dB @ 5 MHz |
| DC offset |
These data are for output with input at 0 offset:
±25 mV maximum for RGB
350 ±25 mV maximum for Y of component video/S-video, composite video
650 ±25 mV maximum for R-Y & B-Y of component video, C of S-video |
| Switching type |
Triple-Action |
|
| Sync |
| Input type |
Autodetect RGBHV, RGBS, RGsB |
| Output type |
RGBHV, RGBS |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, and SECAM |
| Input level |
0 V to 5 Vp-p |
| Output level |
0 V to 5 Vp-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Max input voltage |
5 Vp-p |
| Polarity |
Positive or negative (selectable) |
|
| Control/remote — switcher/scaler |
| Serial control port |
RS-232, 9-pin female D connector |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin
configurations |
2 = TX, 3 = RX, 5 = GND |
| Contact closure |
9-pin female D connector |
| Contact closure pin
configurations |
1 = input 1, 4 = input 2, 6 = input 3, 7 = input 4, 8 =
input 5 |
| IR controller module |
IR 801 (optional) |
| Program control |
Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal,
autoswitchable |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%,
noncondensing
Operating: +3 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Rack mount |
Yes |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.8" H x 17.5" W x 12" D (1U high, full rack
wide)
4.6 cm H x 44.4 cm W x 30.5 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight |
|
| USP
405 |
6.3 lbs (2.9 kg) |
| USP
405, SDI input |
6.4 lbs (2.9 kg) |
| USP
405, SDI output |
6.5 lbs (2.9 kg) |
| USP
405, SDI in & output |
6.9 lbs (3.1 kg) |
| Shipping weight |
|
| USP
405 w/SDI in & output |
12 lbs (6 kg) |
| All
other models |
11 lbs (5 kg) |
| DIM weight (international) |
12 lbs (6 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
|
